3D Printer and Computer Warranty
SERVICE CONTRACT · FORM LWP-1 · REVISED NOVEMBER 14, 2026
These are the terms of the Dreaming3D Lifetime Warranty Plan: a monthly service plan that keeps one 3D printer covered, parts and labor, for as long as the plan is active. Please read them before you enroll.
For a plain-language overview, see our guide to the plan. For one-time visits without the plan, see our setup and repair service terms.
Key terms at a glance
- Price: $24.99 a month for one printer, charged once a month, plus any tax the law requires.
- This plan continues month to month until you or we cancel it. You'll be asked to agree to this separately when you enroll.
- "Lifetime" means for as long as your plan stays active on the covered printer. There's no end date and no age limit on the printer.
- Covered: failures of the printer in normal use, parts and labor, on-site in San Diego County, with no service fee and no deductible.
- Not covered: normal wear, accidents, problems caused by filament or resin, damage from changes or outside repairs, and problems that existed when you enrolled. See section 6.
- Cancel anytime, online, by phone, email, text or mail. It takes effect as soon as we receive it, with no cancellation fee.
- Refunds: cancel within 30 days with no claims made and we refund everything you've paid. After that, we refund the unused days of the current month.
- The alternative: we don't offer a fixed-term version of this plan. Without it, a repair visit is $159.99 per printer, plus parts.
CONTENTS
- Who we are and what this agreement is
- What “lifetime” means
- The covered printer
- When coverage starts and how long it lasts
- What we'll do: your coverage
- What isn't covered
- Limits and other services
- The manufacturer's warranty
- Your responsibilities
- How to make a claim
- What we do after a claim
- Enrollment, billing and changes
- Canceling: you can cancel anytime
- When we can cancel
- Transferring the plan
- Questions and disputes
- Your rights under the law
- Contact details
1. Who we are and what this agreement is
This agreement is between you, the plan holder, and Dreaming3D Inc. ("Dreaming3D", "we", "us"). Dreaming3D Inc. sells this plan, provides the service, and is the business legally and financially responsible for it. Our contact details are in section 18.
The plan's name uses the word "warranty", but legally it's a service contract under California law (Civil Code section 1791): you pay for it separately from the printer, and it's in addition to any warranty from the printer's maker. It isn't the maker's warranty, and it isn't insurance.
This agreement and your enrollment confirmation (section 12) are the whole agreement between us about the plan. You can read this agreement at any time on our website, before or after you enroll, and we send you a copy when you enroll.
2. What “lifetime” means
"Lifetime" refers to the life of your plan, not the life of the printer and not your life. Coverage lasts for as long as your plan stays active on the covered printer. There's no end date and no age limit on the printer. Coverage ends only when the plan is canceled under section 13 or 14.
3. The covered printer
- The plan covers one 3D printer, identified by brand, model and serial number in your enrollment confirmation. Units attached to it, such as a multi-material unit or an enclosure, are covered if your confirmation lists them.
- The printer must be kept in San Diego County, California, where we provide on-site service.
- You must own the printer, or have the owner's permission to enroll it.
- Personal, household and small-business use are all covered, as long as the printer is used as its maker intends.
4. When coverage starts and how long it lasts
- Coverage starts on the date shown in your enrollment confirmation: either the day we accept your enrollment, or the day of the Dreaming3D setup or repair visit at which you enroll. There is no waiting period.
- The printer must be working when you enroll. If we haven't set it up or repaired it in the 30 days before you enroll, we may ask for a short video of it finishing a test print before we accept your enrollment.
- A problem that already exists when you enroll isn't covered. We can fix it first as a normal repair, at $159.99 per printer plus parts, and the plan covers the printer from then on.
- This plan continues month to month until you or we cancel it.
5. What we'll do: your coverage
Except as otherwise expressly provided in this service contract, this service contract obligates Dreaming3D Inc. to provide to the buyer of the product all of the services and functional parts that may be necessary to maintain proper operation of the entire product under normal operation and service for the duration of the service contract and without additional charge.
In plain terms: while your plan is active, if the covered printer stops working properly in normal use, we diagnose it and fix it, parts and labor included, at no extra charge. The exclusions in section 6 and the limits in section 7 are the only exceptions.
COVERED WHILE YOUR PLAN IS ACTIVE
- Diagnosis, by photo, video or an on-site visit.
- Labor, on-site at the printer's location in San Diego County. There's no service-call, trip or diagnosis fee for a claim.
- Functional replacement parts, including circuit boards, power supply, motors, fans, heaters, thermistors and other sensors, wiring, touchscreen, extruder, and parts of a covered multi-material unit.
- Reinstalling the maker's official firmware and recalibrating the printer after a covered repair.
- Anything we set up or repaired that stops working, including the same problem coming back.
We use parts from the printer's maker, or parts of equal quality and function. We decide whether to repair or replace a failed part. If you'd like the old parts back, ask when you make the claim.
6. What isn't covered
NOT COVERED
- Normal wear. Nozzles, build plates and build surfaces, PTFE tubes, wipers and brushes, filament cutters, and on resin printers, the release film (FEP, nFEP or ACF), resin tanks and the LCD masking screen. If one of these fails early because of a manufacturing defect, we treat it as covered.
- Accidents and outside events. Drops, crashes, spills, damage while the printer is being moved, fire, water, power surges, lightning, pests and theft.
- Materials. Problems caused by filament or resin, such as wet filament, debris in the filament, or abrasive filament run through a nozzle that isn't rated for it.
- Changes. Damage caused by modifications, unofficial or modified firmware, third-party parts the maker doesn't support, or repairs by anyone other than us or the maker.
- Problems that existed when you enrolled (section 4).
- Use against the maker's instructions, including materials, temperatures, power or room conditions outside what the maker allows.
- Cosmetic damage that doesn't affect how the printer works.
- Things outside the printer: your computer, slicer, network, apps and print files.
- Routine maintenance such as cleaning, lubrication, belt tensioning and nozzle changes (see section 7).
- Losses beyond the repair: failed or late prints, wasted materials, lost time or lost income. The plan pays for repairing the printer, not for these.
If a problem isn't covered, we'll tell you before doing any work, and we'll only do it if you agree to a written estimate at our normal rates. This section doesn't limit our responsibility for damage we cause ourselves (section 17).
7. Limits and other services
- One printer per plan. Each additional printer needs its own plan.
- Service area. On-site service is in San Diego County only. If the printer moves out of the county, you can cancel and receive the refund in section 13.
- No cap on claims, and no deductible. There's no limit on the number of covered repairs.
- When a repair isn't possible or practical. If the parts needed are no longer available from the maker or a compatible source, or would cost more than a comparable new printer, we'll tell you in writing. You can then move the plan to another printer you own (the enrollment check in section 4 applies), or cancel and receive a full refund of the current month's fee. The plan doesn't pay for a replacement printer.
- Preventive maintenance isn't included. We'll point out maintenance the printer needs when we visit.
- Other services, such as upgrades, tuning, maintenance visits or help with software, are available separately. We'll give you a written price before doing any of them.
8. The manufacturer's warranty
This plan doesn't duplicate the maker's warranty. While the maker's warranty covers the printer, this plan covers only what that warranty doesn't provide: on-site diagnosis and labor, help filing the maker's claim, installing replacement parts the maker sends, and covered failures the maker won't fix.
If a problem looks like a factory defect inside the maker's warranty period, we'll help you open a claim with the maker first. Some makers say a repair by an independent service provider can void their warranty, so we won't open up the printer for a defect the maker should cover unless you ask us to after we've explained that risk. If the maker turns down a failure this plan covers, we fix it under this plan.
9. Your responsibilities
- Use and maintain the printer as its maker instructs, including the routine cleaning, lubrication and part changes the maker lists.
- Keep the maker's official firmware installed, or tell us before you install anything else.
- Tell us about a problem promptly. Stop using the printer if you smell burning, see sparks or hear grinding.
- Give us safe access to the printer at a time we agree on, with an adult (18 or older) present.
- Give us accurate information when you enroll and when you make a claim.
If a failure is caused by not doing one of these, that repair isn't covered, and we'll quote it at our normal rates. It doesn't cancel your plan.
10. How to make a claim
Dreaming3D Inc., 4924 Baloba Blvd #223 Encino,CA, is responsible for your plan and handles every claim. Service is performed by Dreaming3D technicians.
-
1
Contact us. Text or call 858-342-6984, or email dreaming3dprinting@gmail.com. Tell us your name, the printer, and what's happening. A photo or short video helps.
-
2
We diagnose it. We'll reply within 2 business days. Often a photo or video is enough to tell what's wrong; if not, we'll arrange an on-site visit at a time that suits you.
-
3
Service is on-site. We come to the printer's location in San Diego County. You don't need to ship or bring the printer anywhere. If we have to take it to our workshop, we pick it up and bring it back at no charge, and give you a written receipt.
-
4
You only pay for work that isn't covered. We tell you whether the problem is covered before doing any work. Covered repairs cost you nothing. If part of the work isn't covered, we give you a written estimate first and only do it if you agree.
11. What we do after a claim
- Diagnose the failure and repair it, or replace the failed parts.
- If a part has to be ordered, tell you the expected wait, then come back to install it.
- Test the printer with a print once the repair is done.
- Give you a written record of the work, listing each part we installed and whether it's new or reconditioned.
12. Enrollment, billing and changes
This plan continues month to month until you or we cancel it. You'll be charged $24.99 on your enrollment date and on the same day each month after that, until the plan is canceled.
- Enrollment confirmation. When you enroll, we send you a confirmation by email or text that you can keep. It lists the covered printer, your start date, the monthly price, your billing date, how to cancel, and a copy of this agreement.
- Yearly reminder. Once a year we remind you, in the same way you enrolled or the way you usually contact us, what the plan is, how much and how often you're charged, and how to cancel.
- Price changes. We'll tell you at least 7 days and no more than 30 days before a new price takes effect, with instructions to cancel.
- Changes to this agreement. We'll tell you clearly before any change takes effect, with instructions to cancel. A change never reduces coverage for a claim you've already made.
- Missed payments. If a payment doesn't go through, we'll tell you and try again. If it's still unpaid 15 days after the due date, we may cancel the plan under section 14.
13. Canceling: you can cancel anytime
You can cancel at any time, for any reason, using any one of these:
- Online at https://dreaming3d.net/pages/contact-us. If you enrolled online, you can cancel entirely online.
- Text or call 858-342-6984.
- Email dreaming3dprinting@gmail.com.
- Mail to Dreaming3D Inc., 4924 Baloba Blvd #223 Encino,CA.
One method is enough. Your cancellation takes effect immediately when we receive it, and there's no cancellation or administrative fee. We'll confirm it in writing. You don't need to send any other written notice to get your refund.
Your refund
- Within 30 days after you receive this agreement: if you haven't made a claim, we refund everything you've paid. If you have made a claim, we refund the unused days of the current month.
- After 30 days: we refund the unused days of the current month, worked out from the days left in the month you've paid for.
- We pay refunds to your original payment method within 30 days of your cancellation.
If the printer is sold, lost, stolen or destroyed
You can cancel and receive the refund above, move the plan to another printer you own (the enrollment check in section 4 applies), or transfer it to the printer's new owner (section 15).
14. When we can cancel
We can cancel your plan only if:
- a payment is still unpaid 15 days after its due date, after we've told you it didn't go through;
- you materially break this agreement;
- there's fraud or misrepresentation about the plan or a claim; or
- we stop offering this plan to everyone, in which case we'll give you at least 30 days' written notice.
If we cancel, we'll tell you in writing and refund any unearned amount as described in section 13, with no fee.
15. Transferring the plan
- To a new owner. If you sell or give away the covered printer and it stays in San Diego County, the plan can go with it at no charge. Contact us; the new owner accepts this agreement and sets up their own billing.
- To another printer you own. You can move the plan to a different printer at any time. The enrollment check in section 4 applies to the new printer.
16. Questions and disputes
If you're unhappy with how we've handled a claim, contact us first by email or mail, describing what happened and what you'd like us to do. We'll answer in writing within 10 business days.
If we can't resolve it, you can contact the California Department of Consumer Affairs, Bureau of Household Goods and Services, which regulates service contracts in California, or use small claims court. This agreement is governed by California law.
17. Your rights under the law
Nothing in this agreement limits any right you have under California or federal law, including the Song-Beverly Consumer Warranty Act and any implied warranty on a product you bought. We're responsible for damage we cause to your printer or your property while we're working on it.
18. Contact details
| Business | Dreaming3D Inc. |
|---|---|
| Mailing address | 4924 Baloba Blvd #223 Encino,CA |
| Phone or text | 858-342-6984 |
| dreaming3dprinting@gmail.com | |
| Website | dreaming3d.net |
| Online cancellation |
Dreaming3D Inc. · Lifetime Warranty Plan Agreement · Form LWP-1 · Revised November 14, 2026.
SERVICE TERMS · REVISED NOVEMBER 14, 2026
These terms apply to on-site 3D printer setup and repair visits by Dreaming3D Inc. anywhere in San Diego County.
The short version
- Setup: $159.99 per printer for a printer you bought somewhere else. Included when you buy the printer through Dreaming3D.
- Repair visit: $159.99 per printer, covering the visit, diagnosis and labor. Parts are extra.
- Written estimate first. We won't charge for parts or extra work you haven't approved.
- Where: on-site anywhere in San Diego County.
- Want ongoing coverage? The Lifetime Warranty Plan is $24.99 a month and can start the day of your visit.
CONTENTS
- What these terms cover
- Setup visits
- Repair visits
- Estimates, approval and invoices
- Payment
- Scheduling and rescheduling
- Your part
- Firmware, settings and files
- The manufacturer's warranty
- Our work and warranties
- Responsibility for damage
- If we take a printer with us
- Questions and disputes
- Changes to these terms
- Contact details
1. What these terms cover
These terms apply to on-site 3D printer setup and repair visits by Dreaming3D Inc. ("Dreaming3D", "we", "us") in San Diego County, however you book them: by text, phone, email, our repair request page or our website. If your printer is on the Lifetime Warranty Plan, the Lifetime Warranty Plan Agreement governs covered repairs, and these terms apply to anything outside it.
2. Setup visits
Setup is $159.99 per printer for a printer you bought somewhere else, and included when you buy the printer through Dreaming3D. A setup visit includes:
- checking the box and printer for shipping damage, and photographing any we find;
- removing the shipping locks;
- helping you choose a good spot for the printer;
- installing the maker's official firmware, connecting your network and linking the maker's app if you want it;
- running the printer's first-run calibration;
- installing a slicer on one computer, with the right printer and nozzle profile;
- a first print together, with a walkthrough of everyday jobs; and
- recording the serial number and visit date.
Hardware, such as upgrades, accessories or replacement parts you ask us to add, isn't included and is quoted separately.
3. Repair visits
A repair visit is $159.99 per printer. That covers the visit, diagnosis and the labor to repair one printer at one location. Parts are extra.
- If a part has to be ordered, we'll quote it, order it once you approve, and come back to install it. The return visit is included.
- If you decide not to go ahead after the diagnosis, or the printer can't be repaired, the visit fee still applies. You never pay for parts you didn't approve.
4. Estimates, approval and invoices
- Before we do any repair work beyond the visit, we give you a written estimate, by text or email, of the parts and any other charges.
- We won't go over the estimate without your approval.
- Your invoice lists each part we installed and says whether it's new, used or reconditioned.
- If you'd like the old parts back, tell us before we start.
5. Payment
Payment is due when the visit is finished. If a part has to be specially ordered, we may ask you to pay for that part when you approve the order. Prices don't include any tax the law requires.
6. Scheduling and rescheduling
Tell us as early as you can if you need to reschedule. There's no fee for rescheduling.
7. Your part
- Have an adult (18 or older) present for the visit.
- Give us safe access to the printer, a power outlet and room to work.
- Tell us about any modifications, unofficial firmware or earlier repairs.
- Back up any print files or custom profiles you want to keep before we start.
8. Firmware, settings and files
We install the maker's official firmware. A repair or update can reset settings or print profiles to the maker's defaults. We don't open your files except to run a test print.
9. The manufacturer's warranty
Setup follows the maker's own quick-start steps and official firmware. Repairs are different: some makers' policies, including Bambu Lab's, Creality's and Elegoo's, say a repair by an independent service provider can void their warranty. The FTC's position under the Magnuson-Moss Warranty Act is that a maker can't refuse warranty service just because someone else worked on the product, though it can deny coverage for damage that outside work caused.
If your printer is inside the maker's warranty and the problem looks like a factory defect, we'll tell you before we start, so you can choose to use the maker's warranty first.
10. Our work and warranties
We do all work with reasonable care and skill. Setups and repairs without the Lifetime Warranty Plan don't come with a separate Dreaming3D warranty. You keep every right California law gives you, and new parts we install carry any warranty from their maker, which we'll help you use.
To keep the printer and our work covered going forward, add the Lifetime Warranty Plan ($24.99 a month). It can start the day of your visit. See the Lifetime Warranty Plan Agreement for its full terms.
11. Responsibility for damage
We're responsible for damage we cause to your printer or your property while we're working. We're not responsible for problems that existed before our visit, for failed prints or materials, or for lost files or settings beyond restoring the maker's defaults. Nothing in these terms limits any right you have under California law.
12. If we take a printer with us
Sometimes a repair is better done at our workshop. If so, we give you a written receipt describing the printer and its condition and when we expect to return it, and we bring it back when the work is done.
13. Questions and disputes
If you're unhappy with our work, contact us first by email or mail, describing what happened and what you'd like us to do. We'll answer in writing within 10 business days. You can also contact the California Department of Consumer Affairs or use small claims court. These terms are governed by California law.
14. Changes to these terms
We may update these terms. The version posted on our website when you book applies to that visit.
15. Contact details
| Business | Dreaming3D Inc. |
|---|---|
| Mailing address | 4924 Baloba Blvd #223 Encino,CA |
| Phone or text | 858-342-6984 |
| dreaming3dprinting@gmail.com | |
| Website | dreaming3d.net |
Dreaming3D Inc. · Setup and Repair Service Terms · Revised November 14, 2026.
Lifetime Computer Warranty Contract
This Lifetime Computer Warranty ("Warranty") is provided by Dreaming3D Inc ("Dreaming3D Inc") to the original purchaser ("Customer") of a computer system purchased directly from the Dreaming3D Inc.
By accepting this Warranty, the Customer agrees to the following terms and conditions:
1. Coverage
This Warranty covers the computer hardware only, for the lifetime of the Product, under the following condition:
-
The Product fails to start (power on and complete initial startup sequence) due to a defect in Company-supplied hardware components.
If the Product meets this condition, the Company will, at its sole discretion, repair or replace the defective hardware component(s) with functionally equivalent parts.
2. Exclusions
This Warranty does not cover:
-
Normal wear and tear, or decrease in performance over time.
-
Accidental damage, misuse, neglect, spills, or physical harm caused by the Customer or third parties.
-
Electrical damage caused by power surges, lightning, or unstable power supply.
-
Any issues resulting from self-upgrades, modifications, or unauthorized repairs.
-
Peripherals such as keyboards, mice, monitors, printers, or other external devices.
-
Cosmetic damage (scratches, dents, discoloration, etc.) that does not affect basic functionality.
3. Limitations
-
This Warranty applies only to the original purchaser and is non-transferable.
-
The Company is not responsible for data loss, software corruption, or recovery of software/applications. Customers are responsible for backing up their data.
-
Replacement parts may be new, refurbished, or functionally equivalent at Dreaming3D's discretion.
-
The Dreaming3D reserves the right to discontinue models or components, and will provide an equivalent solution if exact parts are no longer available.
4. Warranty Service Process
To obtain warranty service:
-
The Customer must contact the Company with proof of purchase.
-
The Dreaming3D Inc will evaluate the claim and determine eligibility.
-
If approved, and the Customer is outside Southern California they must ship the Product or defective component to Dreaming3D Inc (shipping costs may apply). Customers within Southern California can have the defective product service serviced at the original delivery address or picked up for repair.
-
The Dreaming3D will repair or replace and return the Product within 3-4 weeks.
5. Disclaimer of Liability
This Warranty is the sole and exclusive warranty for the Product. To the maximum extent permitted by law:
-
The Dreaming3D disclaims all other warranties, express or implied, including but not limited to warranties of merchantability or fitness for a particular purpose.
-
The Dreaming3D is not liable for any incidental, consequential, or indirect damages, including but not limited to loss of data, business interruptions, or financial loss.
6. Governing Law
This Warranty shall be governed by and construed under the laws of the state of California, without regard to conflict-of-law principles.
Customer Acknowledgement:
By purchasing and retaining the Product, the Customer acknowledges and agrees to the terms of this Lifetime Computer Warranty.
Items that qualifies under warranty can be shipped to our facility:
BECT Computing
4117 Hillsboro Pike Suite 103-144
Nashville,TN 37215