News — suction force resin printing

🎯 What's Covered:

Part 1: Why Single Prints Work But Multiple Fail

The Physics Explained:

1. Exponential suction force - 12 miniatures = 12x the force (6-12 kg vs 0.5-1 kg)
2. Build plate deflection - 600g of prints causes center to sag, uneven exposure
3. Tilt Release complications - Uneven loads stress the system differently
4. FEP stress - Multiple...

🎯 What Makes This Guide Essential:

Core Principles Explained:

• Why orientation matters - Physics of suction force, peel force, cross-sectional areas
• The 30-45° rule for flat surfaces
• The 10-15° rule for miniatures and figurines
• Self-supporting orientation strategies
• 30° overhang limit (critical specification)

Step-by-Step Slicer Tutorials:

Read the article